Development of methodology for determining a-parameters of an asymmetric rail line
DOI:
https://doi.org/10.5377/nexo.v34i06.13151Keywords:
Four-pole, Kirchhoff's laws, Matrix, Multi-pole, Rail lines, System of differential equationsAbstract
The article considers the methodology of forming the matrix of A-parameters of a rail line, represented by a multi-pole equivalent circuit. It is shown that when using a four-pole equivalent circuit of a rail line in case of violation of the equipotentiality of the circuit, it is impossible to take into account the flow of current along bypass paths, along the earth path, and the influence of adjacent track circuits. A multi-pole equivalent circuit of a rail line is represented as a 2x4 pole, in the rail lines of which self-induction EMF sources are included, and an earth path is used as the second wire. An equivalent multi-pole of equivalent circuit is represented by two groups of poles – at the input and output of the rail line, including one common (ground). The parameters of all elements of the equivalent multi-pole circuit are presented in the form of matrices, which makes it possible to analyze the state of the rail lines when changing the primary parameters of the rail multi-pole in a wide range. Using Kirchhoff's laws and solving a system of ordinary differential equations, the A-parameters of a rail multi-pole are obtained.
Downloads
414
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 Universidad Nacional de Ingeniería
This work is licensed under a Creative Commons Attribution 4.0 International License.
The authors who publish in Nexo Scientific Journal agree to the following terms:
- Authors retain the copyright and grant the journal the right of the first publication under the license Creative Commons Attribution License, which allows others to share the work with a recognition of the authorship of the work and the initial publication in Nexo Scientific Journal.
- Authors may separately establish additional agreements for the non-exclusive distribution of the version of the work published in the journal (for example, in an institutional repository or a book), with the recognition of the initial publication in Nexo Scientific Journal.
- Authors are allowed and encouraged to disseminate their works electronically (for example, in institutional repositories or in their own website) before and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published works.