Flexural behavior of steel fiber reinforced slag- based geopolymer concrete beams
DOI:
https://doi.org/10.5377/nexo.v36i06.17462Keywords:
Geopolymer, GFRP, PVA Alcohol, Steel fiberAbstract
This study includes tested nine reinforced concrete beams. It’s designed to fail in flexural under two-point load. All beams are classified according to the type of concrete and the percentage of PVA into three groups. The first group including four reinforced geopolymer concrete beams with percent of PVA was 0.2 %; second group including four reinforced geopolymer concrete beams with percent of PVA was 0.75 % and third group including one reinforced normal concrete beam. The results showed when comparing the geopolymer concrete beam with the normal concrete beam, noticed that the ultimate strength is equivalent to many times the normal concrete. The best percentage for improving the ultimate load for beam NO.6 (GSSB10) where the percentage of increase was 132% this beam is reinforced by steel bars 2ɸ12mm at top and 2ɸ16mm at bottom. As for the other beams, the percentage increase in ultimate load was for beam NO.1 (46%), beam NO.2 (99%), beam NO.3 (13%), beam NO.4 (60%), beam NO.5 (58%), beam NO.7 (32%) and beam NO.8 (66%). The maximum deflection in all samples was high compared with the normal concrete, where the ultimate deflection reached 30 mm, while in the normal concrete it was 9.65 mm.
Downloads
129
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
The authors who publish in Nexo Scientific Journal agree to the following terms:
- Authors retain the copyright and grant the journal the right of the first publication under the license Creative Commons Attribution License, which allows others to share the work with a recognition of the authorship of the work and the initial publication in Nexo Scientific Journal.
- Authors may separately establish additional agreements for the non-exclusive distribution of the version of the work published in the journal (for example, in an institutional repository or a book), with the recognition of the initial publication in Nexo Scientific Journal.
- Authors are allowed and encouraged to disseminate their works electronically (for example, in institutional repositories or in their own website) before and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published works.