DYNAMICAL STABILITY EVALUATION OF THE MILLING THROUGH ROUGHNESS PROFILES ANALYSIS
DOI:
https://doi.org/10.5377/nexo.v29i2.4576Keywords:
Milling, hardened steel, cutting force, roughness surfaces, dynamical stabilityAbstract
The objective of this research is to carry out the evaluation of the dynamic stability of inclined surface milling process of the hardened steel AISI D6 with high speeds, through the analysis of the roughness profiles in the sense of the advance. The evaluation of the dynamic stability was based in the analysis of the roughness profiles, the signal of the force component in the axis Y in time domain and the Root Mean Square of the signals of force in the three axes. The research demonstrated that it is possible to evaluate the dynamic stability of a milling process through the analysis of the roughness profiles, being obtained profiles uniforms and smaller values of superficial roughness in the most stable processes. It was also demonstrated that the roughness and the superficial quality depend in bigger measure of the dynamic stability of the process that of the cutting speed, being achieved in areas of more dynamic stability, to increase the advance speed and cut with good results in the superficial roughness of the milled piece.Downloads
Download data is not yet available.
Abstract
763
763
PDF (Español (España)) 901
Downloads
Published
2016-12-31
How to Cite
Sánchez Hechavarría, Y., & Mariño Cala, M. (2016). DYNAMICAL STABILITY EVALUATION OF THE MILLING THROUGH ROUGHNESS PROFILES ANALYSIS. Nexo Scientific Journal, 29(2), 69–82. https://doi.org/10.5377/nexo.v29i2.4576
Issue
Section
Articles
License
The authors who publish in Nexo Scientific Journal agree to the following terms:
- Authors retain the copyright and grant the journal the right of the first publication under the license Creative Commons Attribution License, which allows others to share the work with a recognition of the authorship of the work and the initial publication in Nexo Scientific Journal.
- Authors may separately establish additional agreements for the non-exclusive distribution of the version of the work published in the journal (for example, in an institutional repository or a book), with the recognition of the initial publication in Nexo Scientific Journal.
- Authors are allowed and encouraged to disseminate their works electronically (for example, in institutional repositories or in their own website) before and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published works.
