Technological innovation device for rolled, horizontal lathes, the stumps of axes
DOI:
https://doi.org/10.5377/nexo.v25i1.794Keywords:
rolling of cylindrical surfaces, surface plastic deformation.Abstract
The design consists of a device, adapted to a horizontal lathe, for the surface plastic deformation using a roller for refurbishing damaged shafts in the core of the product by friction during operation. These are shafts working under conditions of high contamination by dirt and low speeds to endure high loads, in contact with sliding bearings lubricated by splashes. After two or three years of work they have to be withdrawn from operation due to the high deterioration of the stumps, while internally they have no symptoms of fatigue. After applying the surface treatment to the shaft, the for symptoms of deterioration appear during a period of time which is twice, respect the normal one. The device was designed, manufactured and put into operation adapted to the horizontal lathe. The device was implemented in the recuperation of the axels for the cage cars in the railway transportation of sugar cane. It guarantees the quality of the surface finish and the wear resistance, without affecting railway safety requirements.
DOI: http://dx.doi.org/10.5377/nexo.v25i1.794
Nexo Revista Científica,Vol. 25, No. 01, pp.22-27/Junio 2012
Downloads
920
Downloads
Published
How to Cite
Issue
Section
License
The authors who publish in Nexo Scientific Journal agree to the following terms:
- Authors retain the copyright and grant the journal the right of the first publication under the license Creative Commons Attribution License, which allows others to share the work with a recognition of the authorship of the work and the initial publication in Nexo Scientific Journal.
- Authors may separately establish additional agreements for the non-exclusive distribution of the version of the work published in the journal (for example, in an institutional repository or a book), with the recognition of the initial publication in Nexo Scientific Journal.
- Authors are allowed and encouraged to disseminate their works electronically (for example, in institutional repositories or in their own website) before and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published works.
