Thermo-hydraulic rating of a gasketed-plate heat exchanger for methanol heating
DOI:
https://doi.org/10.5377/nexo.v36i03.16448Keywords:
Gasketed-plate heat exchanger, Methanol, Percent over surface, Pressure drop, RatingAbstract
The use of plate heat exchangers is desirable since they have a simple compact construction, are reliable, and very efficient at small temperature difference between fluids. In the present work the thermo-hydraulic rating of a proposed gasketed-plate heat exchanger was carried out, in order to heat a methanol stream. A safety factor of 1.62, a percent over surface of 3.91% and a cleanliness factor of 0.962 was obtained. The calculated values of the pressure drops for both the hot water and methanol streams were 47,199.05 Pa and 78,414.61 Pa, respectively, while the pumping power required for those both streams were 4.81 kW and 11.38 kW, respectively. The proposed gasketed-plate heat exchanger can be used for the requested heat transfer service since the percent over surface is lower than 25% and the calculated pressure drop of both streams are below the maximum permissible pressure drop established by the process.
Downloads
279
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Universidad Nacional de Ingeniería
This work is licensed under a Creative Commons Attribution 4.0 International License.
The authors who publish in Nexo Scientific Journal agree to the following terms:
- Authors retain the copyright and grant the journal the right of the first publication under the license Creative Commons Attribution License, which allows others to share the work with a recognition of the authorship of the work and the initial publication in Nexo Scientific Journal.
- Authors may separately establish additional agreements for the non-exclusive distribution of the version of the work published in the journal (for example, in an institutional repository or a book), with the recognition of the initial publication in Nexo Scientific Journal.
- Authors are allowed and encouraged to disseminate their works electronically (for example, in institutional repositories or in their own website) before and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published works.
