Analyzing methods of determining pre-destruction of blast hole vicinity
DOI:
https://doi.org/10.5377/nexo.v34i04.12691Keywords:
Rock deformation, Pre-destruction, Strain waveAbstract
The level of deformation of the rock massif of a blasted slab must be planned in advance, depending on the required results of blasting. Thus the energy costs of barren rock overfilling as part of preparing for overburden excavation are inefficient. On the contrary, an increase in the blast energy spent on degrading and breaking the ore mass is an efficient measure of preparing for the excavation of mineral wealth. There are currently two methods used to determine the pre-destruction of a blasted rock massif. The first one is based on determining the number of strain waves passing through locations of borehole charges. However, this method fails to determine the preliminary rock destruction level. The second method is based on determining coefficients of the pre-destruction of a rock massif by these strain waves. The merit of this method is that it allows evaluating the quality pattern of the pre-destruction of a rock massif. The procedure of considering the fraction of energy of the strain waves, reflected by the shielding rock mass to the destructive amount of blasting charges and refracted to this destroyed rock, is proposed.
Downloads
297
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 Universidad Nacional de Ingeniería
![Creative Commons License](http://i.creativecommons.org/l/by-nc-nd/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
The authors who publish in Nexo Scientific Journal agree to the following terms:
- Authors retain the copyright and grant the journal the right of the first publication under the license Creative Commons Attribution License, which allows others to share the work with a recognition of the authorship of the work and the initial publication in Nexo Scientific Journal.
- Authors may separately establish additional agreements for the non-exclusive distribution of the version of the work published in the journal (for example, in an institutional repository or a book), with the recognition of the initial publication in Nexo Scientific Journal.
- Authors are allowed and encouraged to disseminate their works electronically (for example, in institutional repositories or in their own website) before and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published works.