Performance dynamics of pdc cutters used in breaking ductile brittle rock
DOI:
https://doi.org/10.5377/nexo.v34i04.12694Keywords:
PDC bits, PDC cutters, Rock breaking, Three force components (axial, circumferential, and radial) of cutter load, Dynamic-response coefficients, Mean square deviation of forcesAbstract
The widespread application of cutting - chipping action bits with PDC cutters is held back due to the intense chipping and breakage of the latter. This article presents the results of bench-scale tests conducted to determine the values of three mutually perpendicular components of the load on sharp-edged and beveled rock-breaking cutters of 13.5 mm in diameter as well as the dynamic-response factors and mean square deviations (MSD) of these components. The forces change in time by leaps, which reflects the rock fracturing under the cutter. The MSD accepted as per-cycle amplitude is four times as low on average as the mean axial force; when a sharp-edged and a beveled cutter is used, the MSD is by 150 to 300 and by 300 to 500 % lower than the mean circumferential force.
Downloads
313
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 Universidad Nacional de Ingeniería
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
The authors who publish in Nexo Scientific Journal agree to the following terms:
- Authors retain the copyright and grant the journal the right of the first publication under the license Creative Commons Attribution License, which allows others to share the work with a recognition of the authorship of the work and the initial publication in Nexo Scientific Journal.
- Authors may separately establish additional agreements for the non-exclusive distribution of the version of the work published in the journal (for example, in an institutional repository or a book), with the recognition of the initial publication in Nexo Scientific Journal.
- Authors are allowed and encouraged to disseminate their works electronically (for example, in institutional repositories or in their own website) before and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published works.
