Cellular concrete with preformed foam and lightweight aggregates
DOI:
https://doi.org/10.5377/nexo.v36i04.16753Keywords:
Cellular concrete, Structural block, Lightweight aggregate, Compressive strength, Pre-formed foamAbstract
The aim of this work is developed cellular concrete mixtures using preformed foam and lightweight aggregates, for the production of concrete blocks in accordance with the indicated in the Nicaraguan Mandatory Technical Standard. Six concrete mixtures containing lightweight aggregates like lime, pumice and polyethylene fiber were made; furthermore, foam made out of a pressurized dissolution of Texapon N70 in water. Cubes and cylindric specimens were cast and moist-cured for 7 days, and tested to know their compressive strength at 28 days. The results show that the nature of the aggregates, as well as the foam content in the mixtures influenced their densities. It was observed that the percentage of cementing material used is directly proportional to its final strength. The results obtained for compressive strength were comparable to the minimum requirements indicated in the standard for structural blocks, in addition to serving as thermal and acoustic insulation thanks to its high percentage of voids.
Downloads
659
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Universidad Nacional de Ingeniería
![Creative Commons License](http://i.creativecommons.org/l/by/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution 4.0 International License.
The authors who publish in Nexo Scientific Journal agree to the following terms:
- Authors retain the copyright and grant the journal the right of the first publication under the license Creative Commons Attribution License, which allows others to share the work with a recognition of the authorship of the work and the initial publication in Nexo Scientific Journal.
- Authors may separately establish additional agreements for the non-exclusive distribution of the version of the work published in the journal (for example, in an institutional repository or a book), with the recognition of the initial publication in Nexo Scientific Journal.
- Authors are allowed and encouraged to disseminate their works electronically (for example, in institutional repositories or in their own website) before and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published works.