Comparison of the in vitro erosive effect of carbonated drinks on two restorative materials March-June 2022
DOI:
https://doi.org/10.69789/creaciencia.v16i1.684Keywords:
erosive effect, microhardness, carbonated beverages, composite resin, glass ionomer, El SalvadorAbstract
The purpose of the present investigation was to compare the erosive effect, by means of the difference between the initial and final microhardness in Vickers units, caused by carbonated beverages on Fuji 9 glass ionomer and Te-Econom Plus composite resin. A quantitative, descriptive, longitudinal study was conducted using convenience sampling; samples of both restoration materials were prepared with dimensions of 6 mm in height and 20 mm in diameter; two samples were distributed into three groups based on the type of carbonated beverage. These samples were exposed to the beverages for 15 minutes daily over a period of 15 days at room
temperature. Subsequently, microhardness testing was performed using the Vickers test, and data were collected using an observation sheet. The results showed that both restoration materials experienced a decrease in their initial microhardness after exposure to carbonated beverages, with glass ionomer demonstrating a greater erosive effect compared to composite resin. Coca-Cola was found to have the most significant erosive effect. It is concluded that all three carbonated beverages induce an erosive effect that affects the microhardness of the both restoration materials; however, not all cause the same erosive effect of microhardness loss in Vickers units. In this study, glass ionomer was more significantly affected by microhardness loss compared to composite resin, which experienced milder microhardness damage.
Downloads
2
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
© Crea Ciencia
Declaration of originality and assignment of rights
The article must be sent with a declaration of originality, responsibility and assignment of rights of copy of the manuscript, scanned and signed by the author or by one of the authors when the authorship is collective (designated author), stating that the text has not previously published in printed or electronic format, which will not be presented to any other media before knowing the decision of the journal Crea Ciencia and that, if accepted for publication, the authors transfer the copyrights in all forms and media known. At the end of six months of the publication, the text can be shared in another magazine citing the first version of the article published in Crea Ciencia and recording its number and volume. If the article is not published, the UEES agrees to return the rights enunciated to their authors.
Crea Ciencia articles are published in open access and licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.