Design of helical-coil heat exchanger for acetone cooling
DOI:
https://doi.org/10.5377/nexo.v32i01.7988Keywords:
Acetone, Design, Heat exchanger, Helical coilAbstract
The helical coil heat exchangers are employed in several applications due to their compact structure and the high heat transfer coefficients usually obtained. In the present work, the design of a helical coil heat exchanger is accomplished in order to carry out the cooling of a liquid acetone stream. The equipment will has an overall heat transfer coefficient of 23.88 kcal/h.m2.ºC; a heat transfer area of 6.60 m2; an actual number of turns of coil equal to 53; and a height of 2.58 m. Both the acetone and the water stream do not exceed the maximum pressure drop established by the process. The influence of increasing both the acetone feed flowrate and inlet temperature on four design parameters of the helical coil heat exchanger: global heat transfer coefficient, heat transfer area, actual number of turns of the coil, and height of the equipment, was also determined, obtaining as a result that the increase of the two initial variables increases the values to be obtained of these four parameters. Excel spreadsheets were used to obtain the graphics and to solve the design methodology used in this study.
Downloads
7974
Downloads
Published
How to Cite
Issue
Section
License
The authors who publish in Nexo Scientific Journal agree to the following terms:
- Authors retain the copyright and grant the journal the right of the first publication under the license Creative Commons Attribution License, which allows others to share the work with a recognition of the authorship of the work and the initial publication in Nexo Scientific Journal.
- Authors may separately establish additional agreements for the non-exclusive distribution of the version of the work published in the journal (for example, in an institutional repository or a book), with the recognition of the initial publication in Nexo Scientific Journal.
- Authors are allowed and encouraged to disseminate their works electronically (for example, in institutional repositories or in their own website) before and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published works.