Thermal design of a double-tube heat exchanger for acetone cooling
DOI:
https://doi.org/10.5377/nexo.v32i02.9265Keywords:
Pressure drop, Design, Hairpins, Heat exchangerAbstract
The double-tube heat exchanger is one the simplest piece of equipment which performs heat exchange in a continuous mode between two fluids. In the present work the thermal design of a double-tube heat exchanger for the cooling of a liquid acetone is carried out. It was also evaluated the influence of the increment of acetone feed flowrate over six design parameters of the heat exchanger: 1) overall heat transfer coefficient; 2) heat transfer area; pressure drop of 3) acetone and 4) ethylene glycol streams; 5) heat exchanged and 6) total amount of hairpins needed. The heat exchanger must have a total heat transfer area of 6.0 m2 and a total amount of hairpins of 10 to fulfill the system’s thermal duty. Both the acetone and ethylene glycol streams have pressure drop values lower than the maximum allowable limit established by the process (110 000 Pa). The increment of the acetone feed flowrate causes the increment of the six parameters studied.
Downloads
2555
Downloads
Published
How to Cite
Issue
Section
License
The authors who publish in Nexo Scientific Journal agree to the following terms:
- Authors retain the copyright and grant the journal the right of the first publication under the license Creative Commons Attribution License, which allows others to share the work with a recognition of the authorship of the work and the initial publication in Nexo Scientific Journal.
- Authors may separately establish additional agreements for the non-exclusive distribution of the version of the work published in the journal (for example, in an institutional repository or a book), with the recognition of the initial publication in Nexo Scientific Journal.
- Authors are allowed and encouraged to disseminate their works electronically (for example, in institutional repositories or in their own website) before and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published works.