In vitro comparison of stability and dimensional accuracy between three brands of condensation silicones
DOI:
https://doi.org/10.5377/creaciencia.v0i7.8592Keywords:
Dimensional stability, Dimensional accuracy, Condensation SiliconesAbstract
In this investigation, the stability and dimensional accuracy of three Speedex, Coltoflax and Protesil condensation silicone-type printing materials were compared in three sizes (two diameters and one length) with respect to a metal model. 30 prints were taken from the metal model, 10 Each brand of silicone was then emptied with extra hard plaster and the measurements were taken with a 3-dimensional micrometer (MD, CO, VL). From the results obtained it is concluded that the three silicones have different dimensional accuracy.
Downloads
827
Downloads
Published
How to Cite
Issue
Section
License
© Crea Ciencia
Declaration of originality and assignment of rights
The article must be sent with a declaration of originality, responsibility and assignment of rights of copy of the manuscript, scanned and signed by the author or by one of the authors when the authorship is collective (designated author), stating that the text has not previously published in printed or electronic format, which will not be presented to any other media before knowing the decision of the journal Crea Ciencia and that, if accepted for publication, the authors transfer the copyrights in all forms and media known. At the end of six months of the publication, the text can be shared in another magazine citing the first version of the article published in Crea Ciencia and recording its number and volume. If the article is not published, the UEES agrees to return the rights enunciated to their authors.
Crea Ciencia articles are published in open access and licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
