Compressed earth block brick: an alternative to reduce the environmental burden

Authors

  • Bessy Maria Ramos UNITEC
  • Julio Cesar Lopez Universidad Tecnologica Centroamericana

DOI:

https://doi.org/10.5377/innovare.v8i2.9061

Keywords:

Compressed earth block, Enviroment, Mechanical properties, Traditional block

Abstract

Introduction: Baked clay blocks have been used very frequently for construction. The manufacturing process involves cooking clay in artisanal furnaces that gives off carbon dioxide (CO2). CO2 is a primary waste that increases the environmental burden of greenhouse gases. The study aim was to evaluate resistance of an alternative material known as compressed earth block (CEB). Methods: The study was descriptive. Clay blocks and CEB were compared using its main mechanical property, that is, compressive strength (f’C). Results: Resistance of traditional blocks was less than 1,000 psi, while the resistance of CEB with additions of Portland cement and rice husks reached a value greater than 1,500 psi. Conclusion: The CEB meets the structural requirement NW (negligible weathering). From an absorption point of view, CEB can be classified as moderate weathering (MW).

Downloads

Download data is not yet available.
Abstract
2144
El ladrillo de bloque de tierra comprimida: una alternativa para reducir la carga ambiental (Español (España)) 2661

Published

2019-12-31

How to Cite

Ramos, B. M., & Lopez, J. C. (2019). Compressed earth block brick: an alternative to reduce the environmental burden. Innovare: Revista De Ciencia Y tecnología, 8(2), 88–93. https://doi.org/10.5377/innovare.v8i2.9061

Issue

Section

Original article

Similar Articles

<< < 8 9 10 11 

You may also start an advanced similarity search for this article.